ALMODELS

My name is Alex and I’m RC models creator from Russia. I’ve constructed and offering for purchase few versions of the RC Piper Super Cub Pa-18 KITS. Balsa version KIT – classic balsa model KIT for USD290 (requires film coating) Foam version KIT – designed to be covered with Depron for USD120. Both models are 1/5 scale. Wingspan: 1950 mm AUW: Foam version: ~1.8 kg Balsa version: ~2.3 kg Payment Methods: If you are interested in buying my KIT, please contact me by email: almodels@vk.com

KIT contains: - Plywood parts 3 mm - Balsa parts 1.5 and 3 mm thick - Cowl spout made of fiberglass - Aluminum tubes - Transparent plastic for glazing - Screws, nuts, self-tapping screws - Neodymium magnets - Metal parts for assembling the main landing gear Assembly manual available electronically after purchase. BOM (materials needed to complete to complete the KIT): Motor: Sunnysky 3525 – 720KV or equivalent. ESC: 80-100A Prop: APC 13* 6.5 Battery: 4S, 1600-2500 mAh Servo: 12-13g with a metal gears - 6 pcs. Model wheels D~150mm Tail wheel assembly -1pc Сovering film ~5m Pin hinges -6pcs Flat hinges for a door 24*12 - 4 pieces 8 pins connector MPX - 2 pairs

KIT contains: -Plywood parts, thickness 3 mm -Details from depron, thickness 5 mm. -Glazing parts, 1 set (PET material 0.3mm) -Metal fittings and magnets BOM (materials needed to complete to complete the KIT): Depron 3mm - (depron foam sheets, for example underlay for flooring, or in your local model store) Bicycle spokes for landing gear, diameter 2mm, length ~290mm, it is obligatory that there are screws for the spokes in the kit - 6 pcs. Threaded stud 4mm, need about 10cm Model wheels D~150mm Tail swivel wheel Rods for handlebars + fittings: rod retainer, rod tip. Model hinges, flat format, size, for example, 28*16mm -6 pcs. Electronics according to the list for the balsa model.